preferred3dprinting
Rapid prototyping, 3D Printed Marketing Material, 3D printed widgets...you need it, we print it!
www.preferred3dprinting.com rhluttrell@rocketmail.com 704.644.9780
Machines
2 Makerbot Replicator 2X 3D printers.
Specifications:
-
Print Technology: Fused Deposition Modeling
-
Build Volume: 24.6 L x 15.2 W x 15.5 H cm [9.7 x 6.0 x 6.1 in]
-
Layer Resolution: 100 microns [0.0039 in]
-
Positioning Precision: XY: 11 microns [0.0004 in] Z: 2.5 microns [0.0001 in]
Material: ABS
Colors: Red, Blue, White, Near Transparent, Natural, Black, Yellow Jasmine Green, and Orange. If you don’t see it listed we can order it.
On order, due in September:
Stacker3D Printer
Specifications:
-
Type: FFF (Fused Filament Fabrication)
-
Filament diameter: 1.75mm
-
Hot end: HYBRID by STACKER
-
Standard nozzle size: 0.50mm
-
Option nozzle sizes: 0.30, 0.40, 0.60, 0.80, and 1mm
-
MAX Temp: 300 degrees C
-
MAX X/Y print area one head printing: 255mm (10") x 458mm (18")
-
MAX X/Y print area two heads printing: 255mm (10") x 220mm (8.7")
-
MAX X/Y print area three heads printing: 255mm (10") x 138mm (5.46")
-
MAX X/Y print area four heads printing: 255mm (10") x 100mm (3.9")
-
MAX Z height print area: 220mm (8.75") or 600mm (24") with Z-height extender option (double stack, not pictured but available)
-
Layer resolution: .1mm to 1mm or 100 micron to 1000 microns
-
Positional accuracy for X/Y: 6 microns or .00023"
-
Positional accuracy for Z: 4 microns or .00015"
-
Real world print accuracy: .0005" to .002" ( depends mostly on filament diameter consistency)
Material:ABS and Carbon Fiber. Colors TBD.
If there is a material you would like to use other than what is listed, we will be able to accomodate as long as the material is compatible with our machines.
© 2023 by MY SITE NAME. Proudly created with Wix.com